Nortel North American DMS-100 Instruction Manual page 547

1-526 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone/integrated)
Clearing ORDB access trouble
Example of TAMI Response
CARD STATUS CARD SUBSTATUS APPLID LINK 0 STATUS
3
Example of TAMI Response
CARD STATUS CARD SUBSTATUS APPLID LINK 0 STATUS
4
At the TPC
5
297-8021-544 Standard 14.02 May 2001
press the Enter key.
where
5
is BSY link
d Type
>1
press the Enter key.
where
1
is the link number
InSv Comact
To busy the HSDA card, type:
>1
press the Enter key.
ManB
Comact
To return to the TAMI main menu, press the PF3 key one time.
To test the HSDA card, load the diskette in the disk drive of the TPC. Insert
the Diagnostic Boot diskette in the disk drive of the TPC. Push the lever to
lock the diskette in place.
Note: Make sure the edge that has notches is at the top and the label
faces the hard disk.
(continued)
HSDA3386
HSDA3386
LINK 0 STATUS
ManB
ManB
LINK 0 STATUS
ManB
ManB