Nortel North American DMS-100 Instruction Manual page 28

1-12 Trouble locating and clearing procedures (continued)
Recovering a stuck two-slot LIU7
Recovering a stuck two-slot LIU7
At the MAP terminal
1
2
3
4
5
6
7
8
297-8021-544 Standard 14.02 May 2001
DANGER
Contact your next level of support
Do not attempt this procedure before contacting your next
level of support.
Access the PM level of the MAP display by typing
>MAPCI;MTC;PM
and pressing the Enter key.
Post the system-busy not accessible LIU7 by typing
>POST LIU7 SYSB
and pressing the Enter key.
If the state of the LIU7 is
SysB (NA)
SysB
Display the next system-busy LIU7 by typing
>NEXT
and pressing the Enter key.
Repeat step 3 to find the system-busy not accessible LIU7.
Determine the location of the LIU7.
Determine the LIM associated with the stuck LIU7 by typing
>QUERYPM
and pressing the Enter key.
Post the LIM associated with the stuck LIU7 by typing
>POST LIM lim_no
and pressing the Enter key.
where
lim_no
is the number of the LIM (0 or 1)
Access the F-bus level of the MAP display by typing
>FBUS
and pressing the Enter key.
(continued)
Do
step 6
step 3