Updating Tops Mpx Software - Nortel North American DMS-100 Instruction Manual

1-638 Trouble locating and clearing procedures (continued)

Updating TOPS MPX software

Application
Use this procedure to update the TOPS MPX position software.
Action
A summary of the Updating TOPS MPX software appears in the flowchart on
the following page. Use the instructions that follow this flowchart to perform
the procedure.
All TOPS MPX positions on a token ring must be at the same release level. To
make sure all positions are on the same level:
•
•
•
You can update separate token rings at different times.
Tools
Installation disks #1 and #2 are required to perform this procedure. Installation
disks #1 and #2 contain the latest version of the TOPS MPX software.
297-8021-544 Standard 14.02 May 2001
busy out all positions on the token ring
load the positions again
return the positions to service