Nortel North American DMS-100 Instruction Manual page 277

1-262 Trouble locating and clearing procedures (continued)
Reseating a line card
Reseating a line card
At the MAP terminal
1
2
297-8021-544 Standard 14.02 May 2001
(continued)
WARNING
Possible equipment damage
Proceed only when a step in a maintenance procedure directs
you to this procedure. Independent use of this procedure can
cause equipment damage or loss of service.
To display the location and product engineering code (PEC) for the line card,
type
>MAPCI;MTC;LNS;LTP;LTPISDN
>Post D or L <Dir No.> or <Len No.>
>CKTLOC
and press the Enter key.
Example of a MAP response:
CKTLOCSite Flr RPos Bay_id Shf Description Slot EqPECHOST 03 C01
LCEI01 18 LCME 01
Note: In this example, the location of the line card is
Site
in the HOST office
Flr
on the 3rd floor
RPos
in row C and in line equipment bay 01
Bay_id
in ISDN line concentrating equipment, bay 01
Shf
on shelf 18
Description
in hardware device LCME, bay 01
Slot
in slot 02, drawer 09
Note: In this example, the PEC of the line card PEC is BX27AA.
Record the location of the line card.
02:09 BX27AA