Nortel North American DMS-100 Instruction Manual page 404

Setting up the signaling link marginal performance report
25
26
27
28
29
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
and press Enter.
To go to the end of the table LOGCLASS, type
>BOTTOM
and press Enter.
Example of a MAP response:
DPAC 102 0
To determine the number of the last class in the table, type
>LIST
and press Enter.
Example of a MAP response:
REPNAME CLASS
–––––––––––––––––––––––––––––––––––––––––––––––––––––––
DPAC 102 0
Note: In the MAP response, the number of the last class is the last
number in the CLASS column.
To add the CCS198 log to a new class in the table, type
>ADD
and press Enter.
Example of a MAP response:
REPNAME:
To enter the log name and report number, type
>CCS198 0
and press Enter.
Example of a MAP response:
CLASS:
To enter the new class number (1 greater than the last class listed in the table,
as noted in step 26), type
>new_class_number
and press Enter.
where
new_class_number
is the number of a new class
Example of a MAP response:
THRESHLD:
0 N –1 Y
THRESHLD SUPPRESS
0 N
1-389
(continued)
TUNITS SYSLOG
–1 Y