Nortel North American DMS-100 Instruction Manual page 503

1-482 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
Clearing position failure - cannot reboot TPC
22
23
24
25
26
297-8021-544 Standard 14.02 May 2001
Replace the SBC card. Refer to Card Replacement Procedures and return
to this procedure.
If
1 meg of memory continues to
appear
the TPC reboots
any other message appears
Replace the new SBC card with the original SBC card removed in step 22.
Refer to Card Replacement Procedures and go to step 24.
For additional help, contact the next level of support.
Perform the procedure Placing MP position in service (standalone) .
This procedure is complete.
(end)
Do
step 23
step 25
Refer to the correct locating and
clearing trouble procedure for
the indicated trouble.