Nortel North American DMS-100 Instruction Manual page 564

TOPS MPX Operator complaint audio/headset malfunction
7
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
For detailed descriptions of DOS internal commands, refer to your DOS
manual. The following DOS and nonDOS external commands are
available:
INFO
Describes commands. Run INFO for this list, or run INFO
<command> for help on a correct command.
ATTRIB
DOS command to change file attributes.
CHKDSK
DOS command to verify and restore accuracy of the file
system.
COMP
DOS command to compare two files.
DISKCOMP
DOS command to compare two diskettes.
DISKCOPY
DOS command to make a copy of a diskette.
FDISK
DOS command to read and set hard disk partition table.
FORMAT
DOS command to format hard disks and floppy diskettes.
LABEL
DOS command to set volume labels.
MEM
DOS command to report amount of available memory.
MODE
DOS command to set screen mode, redirect printer, etc.
PRINT
DOS print spooler.
SYS
DOS command to make a diskette bootable.
TREE
DOS command to display directories and subdirectories.
XCOPY
DOS extended copy command.
AUDDIAGS
Diagnostics for TOPS MPX audio card.
To select audio diagnostics, type the following command:
>AUDDIAGS [OPTIONS]
and press the DOS ENTER key.
where
1-543
(continued)