Scheduling Isup Trunk Audits - Nortel North American DMS-100 Instruction Manual

Application
Use the following procedure to schedule ISDN user part (ISUP) trunk audits.
Definition
ISUP trunk audits switch units with CCS7 and trunk test position (TTP)
improvements for trunks that use CCS7 signaling (ISUP trunks). To correct
state mismatches, the trunk audit runs on all ISUP trunks one time a day. In
table OFCENG, office parameter
CIRCUIT_QUERY_AUDIT_START_TIME specifies ISUP trunk audit time.
Common procedures
There are no common procedures.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart as a summary of the procedure. Follow the steps to perform the
procedure.
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued) 1-375

Scheduling ISUP trunk audits