Nortel North American DMS-100 Instruction Manual page 571

1-550 Trouble locating and clearing procedures (continued)
TOPS MPX Power-on self test
3
4
5
6
7
297-8021-544 Standard 14.02 May 2001
(end)
If
error code other than 165 ap-
pears and the screen is blank,or-
no error codes appear with a
combination of beeps and the
screen is blank
Insert Hardware Reference Diskette.
Run Automatic Configuration
Explanation: A 165 error indicates an unidentified adapter in the PC.
Press F1 to continue the booting process.
Access the configuration menu.
The IBM logo screen appears on the terminal.
Press ENTER to continue.
The configuration menu appears with the following choices:
• View Configuration
• Change Configuration
• Backup Configuration
• Restore Configuration
• Run Automatic Configuration
Update the Configuration files in the PC.
Select Run Automatic Configuration from the configuration menu.
The PC will read the adaptor IDs from the reference diskette and update the
configuration files in the PC.
The update of the configuration files in the PC is correct and the power-on self
test is complete. You can follow the sequence of tests that the system goes
through to further test the TOPS MPX. To perform this action, go to TOPS
MPX terminal system diagnostics.
DoThen
Go to the TOPS MPX Power-on
self test troubleshooting proce-
dure.