Nortel North American DMS-100 Instruction Manual page 597

1-576 Trouble locating and clearing procedures (continued)
TOPS MPX terminal system diagnostic
TOPS MPX
(continued)
MESSAGE
MESSAGE
Primary Adapter Select Cable Type
1. Token Ring Network Adapter Cable
2. Type 3 Media Filter Cable
To terminate Press CTRL- C
INSTRUCTIONS
If not already done, disconnect the Primary adapter
cable from the network.
Make sure the other end still connects to the Primary Token ring
network adapter. remove the cable from the adapter board will result
in a "16691 error" (Open Phase Test Failure).
Press 'ENTER'
297-8021-544 Standard 14.02 May 2001
Testing - Primary Token Ring Adapter
To terminate Press CTRL- C
Use 'CA Call' key to select 1. Token Ring Network Adapter
Cable.
Press ENTER
ESC = Quit F1 = Help
Page 1 of 1
Page 1 of 1
Page 1 of 2