Nortel North American DMS-100 Instruction Manual page 233

1-218 Trouble locating and clearing procedures (continued)
Replacing a line card
Replacing a line card
At the MAP terminal
1
297-8021-544 Standard 14.02 May 2001
(continued)
WARNING
Possible equipment damage
Proceed only when a maintenance procedure directs you to
this procedure. Separate use of this procedure can cause
equipment damage or loss of service.
To display the location and product engineering code (PEC) for the line card,
type
>MAPCI;MTC;PM;POST LCME <LCME_NO>;QUERYPM
and press the Enter key.
Example of a MAP display:
CI:
>MAPCI NODISP; MTC; PM; POST LCME36 0; QUERYPM
MAPCI:
MTC:
PM:
POST:
PM TYPE: LCME Int. No.: 10 Status index: 5 Node_No: 177
LCME HOST 36 0 Memory Size-Unit 0: 256K, Unit 1: 256K
Loadnames: LCMINV - LCME81BA, Unit0: LCME81BA,
Unit1: LCME81BA
LCM REX is ON; PASSED on TUE. 1997/10/28 at 01:30:05
Node Status: {OK, FALSE}
Unit 0 Status: {OK, FALSE}
Unit 1 Status: {OK, FALSE}
Ring Generator Status:
RG 0 Status: {OK}
RG 1 Status: {OK}
RG in Overload : NO
Site Flr RPos Bay_id Shf Description Slot EqPEC
HOST 03 CC06 LCEI 36 04 LCME 36 0
Services : ISDN Equipped
Note: In this example, the location of the line card is
Site
in the HOST office
Flr
on the 3rd floor
RPos
in row C that contains the line equipment bay, 01,
/RG: 1
/RG: 1
Preferred
Standby
BX30AB