Nortel North American DMS-100 Instruction Manual page 372

43
44
45
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Running a C7BERT for high-speed links
If
you want to stop the test auto-
matically at a pre-set time
you want to inject bit errors
To determine if a stop time has been set, type
>SETSTOP link_no
and press the Enter key.
where
link_no
is the number of the link (0 to 15) on which the HSL C7BERT is running
If the response is
Link nn: Stop time set at:
time
Link nn: No stop time has been
set
anything else
To clear the stop time, type
>SETSTOP link_no
and press the Enter key.
where
link_no
is the number of the link on which the HSL C7BERT is running
If the response is
Stop time cleared
anything else
To set the new stop time, type
>SETSTOP link_no
and press the Enter key.
where
link_no
is the number of the link (0 to 15) on which the HSL C7BERT is running
day
is the day on which you want the test to stop automatically (MON, TUE,
WED, THU, FRI, SAT, or SUN)
Do
step 43
step 48
STATUS
Do
step 44
step 45
step 78
CLEAR
Do
step 45
step 78
SET day hours
1-357
(continued)
minutes