Nortel North American DMS-100 Instruction Manual page 655

1-634 Trouble locating and clearing procedures (continued)
Troubleshooting a customer-reported failure
No PM alarms
(continued)
5
6
7
8
9
10
297-8021-544 Standard 14.02 May 2001
Note: The FRIU number and channel assigned to this agent appear under
the CONNECT TO header in the MAP response. In the example, the FRIU
is 5 and the channel number is 7.
To return to the CI level of the MAP display, type
>QUIT
and press Enter.
To access the PM level of the MAP display, type
>MAPCI; MTC; PM
and press Enter.
To post the FRIU identified in step 4, type
POST FRIU friu_no
and press Enter.
where
friu_no
is the FRIU number obtained in step 4
If the FRIU
is SysB
is SysB (NA)
is ManB
is ManB (NA)
is ISTb
is ISTb (NA)
is InSv (NA)
is InSv
Perform the procedure Clearing a PM FRIU critical alarm (on an LPP) in
Alarm and Performance Monitoring Procedures . Do not return to this
procedure.
Perform the procedure Clearing a PM FRIU major alarm (on an LPP) in Alarm
and Performance Monitoring Procedures . Do not return to this procedure.
Perform the procedure Clearing a PM FRIU minor alarm (on an LPP) in Alarm
and Performance Monitoring Procedures . Do not return to this procedure.
Do
step 8
step 8
step 9
step 9
step 10
step 8
step 11
step 11