Nortel North American DMS-100 Instruction Manual page 143

1-128 Trouble locating and clearing procedures (continued)
Replacing a 14-in. disk drive unit
70
71
WARNING:
corruption on the disk that may require it to be
reformatted.
Writing label of Volume IMAGE
Successful
Starting Initialization of Volume IMAGE
A break HX of this process may cause severe corruption on
this volume that may require reinitialization of all non
initialized volumes.
Number of Bad Blocks = 0
Successful
Update Done
72
73
74
297-8021-544 Standard 14.02 May 2001
Determine if you need to add more volumes to the directory.
If you
need to add more volumes
do not need to add more vol-
umes
To enforce the allocation of the volumes, type
>UPDATE
and press the Enter key.
Example of a MAP response:
A break HX of this process may cause severe
To quit the software utility for disk allocation, type
>QUIT
and press the Enter key.
To test the DDU controller, type
>TST
and press the Enter key.
If the TST command
passed
failed
To return the DDU to service, type
>RTS
and press the Enter key.
If the RTS command
passed
(continued)
Do
step 69
step 71
Do
step 74
step 81
Do
step 75