Nortel North American DMS-100 Instruction Manual page 384

Saving key, screen, status messages, command privileges and
4
KEYS/SEQUENCE
DOS-ENTER KEY
DAS CMD KEY
TOPS DAS-ENTER KEY
RESET KEY
SEQUENCE
ESC KEY
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
and press the DOS-ENTER key.
The system displays the prompt:
>C:\>
Copy the following files to a disk:
• DAS.KEY - keyboard layout file
• DAS.SCR - screen layout file
• DAS.OPT - options file
• DAS.CMD - command privileges file
• DAS.STA - Status message file
• DAS.SAV - screen server file (If you copied this file to your disk, use the
DOS DEL command to delete the file from the disk. This file must be on
the hard disk of ONLY ONE screen server position for each token ring.)
Insert a blank formatted disk in Drive A:
Type the following string:
>COPY DAS.* a:
and press the DOS-ENTER key.
* To save all 20 (max.) screen files type the following:
>COPY *.SCR A:
and press the DOS-ENTER key.
After you complete this copy process for all the files, remove the disk and
store for future use.
The following table provides TOPS MPX keys/sequences for IBM keys the
user can request through the DOS application.
IBM Keyboard
<--- Enter
F3
F4
Press and hold Ctrl, Alt
and Del keys
Esc
option definitions
TOPS MPX Keyboard
Bus
DAS Cmd
DAS Enter
Press and hold <-- and
Word <-- keys. Press Clg
key
Clear Field
1-369
(end)