Nortel North American DMS-100 Instruction Manual page 403

1-388 Trouble locating and clearing procedures (continued)
Setting up the signaling link marginal performance report
19
20
21
22
23
24
297-8021-544 Standard 14.02 May 2001
Determine the value of field ENABLED.
If the value of field ENABLED
is Y
is N
If each hour CCS198 log reports are necessary, then the WHEN field needs
to change. Change the REP subfield from AUTO to HOURLY. The STARTUP
subfield will be C00.
Example of a MAP response:
CLASS ENABLED
––––––––––––––––––––––––––––
C7SLMPR Y
To confirm the editing of the tuple, type
>Y
and press Enter.
Example of a MAP response:
TUPLE CHANGED:
Go to step 24.
To change the value to Y, type
>CHANGE 2 Y
and press Enter.
Example of a MAP response:
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
To confirm the command, type
>Y
and press Enter.
Example of a MAP response:
TUPLE CHANGED:
To quit from table OMACC, type
>QUIT
and press Enter.
To access table LOGCLASS, type
>TABLE LOGCLASS
Do
step 20
step 21
WHEN
HOURLY COO
(continued)