Nortel North American DMS-100 Instruction Manual page 559

1-538 Trouble locating and clearing procedures (continued)
TOPS MP TAMI trouble (standalone)
Clearing TAMI response failure
FSP panel
J K L M
5
6
297-8021-544 Standard 14.02 May 2001
Circuit breakers
W X Y Z
If a power outage
has occurred
has not occurred
Replace the power card in slots 1-3. Refer to Card Replacement Procedures
and return to this point.
If TAMI
responds with normal boot
messages
does not respond
displays any other message
Replace the SBC card. Refer to Card Replacement Procedures and return
to this point.
If TAMI
responds with normal boot
messages
does not respond
(continued)
Frame fail light on FSP
Frame fail
Fan fail
Fan fail override
Do
step 5
step 6
Do
step 9
step 6
Refer to the correct clearing
trouble procedure.
Do
step 9
step 7
–48V
ABS
–48V
FAN