Nortel North American DMS-100 Instruction Manual page 491

1-470 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
Clearing MP keyboard trouble
20
21
TAMI response
Performing ROM Terminal Component Diagnostic...
Performing CPU Terminal Component Diagnostic...
Performing Exceptions Terminal Component Diagnostic...
Performing RAM Terminal Component Diagnostic...
Performing HSLI Port Terminal Component Diagnostic...
Performing UART Terminal Component Diagnostic...
Performing Keyboard Terminal Component Diagnostic...
Performing Telephony Terminal Component Diagnostic.
22
At the TAMI
23
297-8021-544 Standard 14.02 May 2001
(continued)
Press every key on the MP keyboard and check that the keys are highlighted
on the MP display. Follow the prompts to exit the diagnostic.
If test
passes
fails
To run the HSLI card test from the Diagnostics screen of the TAMI, enter:
>POSDIAG n CARD
and press the Enter key.
where
n
is the position number (0, 1,2, or 3)
If test
passes
fails
Replace the HSLI card. Refer to Card Replacement Procedures and return
to this point.
To run the MP manual keyboard test, enter:
>POSDIAG n MANKEY
and press the Enter key.
where
n
is the MAP position number (0, 1,2, or 3)
Note: The user can only select ManB positions.
Do
step 26
step 21
Do
step 25
step 22