Nortel North American DMS-100 Instruction Manual page 335

1-320 Trouble locating and clearing procedures (continued)
Running a C7BERT
27
28
29
297-8021-544 Standard 14.02 May 2001
(continued)
where
link_no
is the number of the link that the C7BERT runs on
If the response
is Stop time cleared
is other than listed here
To set the stop time to a new value, type
>SETSTOP link_no
and press Enter.
where
link_no
is the number of the link (0 to 15) the C7BERT is running on
day
is the day you want the test to stop automatically
(MON, TUE, WED,THU, FRI, SAT, or SUN)
hours
is the hour you want the test to stop automatically (0 to 23)
minutes
is the minute you want the test to stop automatically (00 to 59)
Example input:
>SETSTOP 3 SET
Note: The example entry sets the stop time for link 3 on every Monday at
10:30 a.m.
If the response
is Link nn: Stop time set at:
is 19xx/yy/zz
is hh:mm:00.000 ddd
is other than listed here
Determine if the stop time is correct.
If the stop time
is correct
is wrong
Wait until the C7BERT stops.
Go to step 45.
Do
step 27
step 66
SET day hours
MON 10 30
Do
step 28
step 66
Do
step 29
step 26
minutes