Nortel North American DMS-100 Instruction Manual page 383

1-368 Trouble locating and clearing procedures (continued)
Saving key, screen, status messages, command privileges and
option definitions
definitions
At your current location
1
2
3
297-8021-544 Standard 14.02 May 2001
(continued)
DANGER
Loss of previous key, screen, status messages, command
privileges or option definitions
The first installation procedure destroys any previous key or
option definitions. You must save keys and options defined
on a disk before you perform the installation procedure.
Key and option definitions.
If
The user did not install key,
screen, Status messages, com-
mand privileges, or option defi-
nitions.
The user installed TOPS MPX.
The user did not save the current
key, screen, Status messages,
command privileges, and option
definitions on a disk.
At the TOPS MPX, access DOS at the C:\> prompt.
Note: Perform this file copy procedure on a disk for OPR positions.
Perform this procedure again for SA positions.
If
TOPS MPX software runs
the A:\ prompt shows
the C:\ prompt does not appear
Type the following to access the root directory of the hard drive:
>CD\
Do
Go to Installing key, screen, sta-
tus messages, command privi-
leges, and option definitions
procedure to make these defini-
tions.
Step 2
Do
Turn TOPS MPX power off. In-
sert system disk. Turn TOPS
MPX power on.
Remove diskette in Drive A and
type C:
Step 3.