Nortel North American DMS-100 Instruction Manual page 639

1-618 Trouble locating and clearing procedures (continued)
TOPS MPX Token Ring LAN troubleshooting
09/21/91 13:06:56 DFIPD212E Ring adapter hardware failed
––––––>
Message
Number
DFIPD213E
297-8021-544 Standard 14.02 May 2001
000000001004 0000002000000103
Adapter Error Data
Number
Explanation
Message:
Ring adapter microcode failed
Meaning: The Adapter Support Interface code fails.
Action: Do the following:
1. Verify that the indicated adapter is installed and the
switches are set correctly. Correct any errors found.
2. Start the PC again.
3. Start the Ring Diagnostic.
4. If the same message occurs, try a different System
Diskette.
5. If the preceding action does not correct the problem,
record the variable data. Perform manual troubleshooting
procedures.
Variable Data:
(continued)