Nortel North American DMS-100 Instruction Manual page 297

1-282 Trouble locating and clearing procedures (continued)
Returning a busy D-channel to service
ISDN PRI primary and backup D-channels
8
9
10
297-8021-544 Standard 14.02 May 2001
where
d_channel
is the D-channel identifier (D1 or D2)
Example of a MAP response:
D2: STATE CHANGED
Note: The D-channel state changes to manual busy.
If the BSY command
passed
failed
To return the busy D-channel to service, type
>RTS d_channel
and press the Enter key.
where
d_channel
is the D-channel identifier (D1 or D2)
Example of a MAP response:
D2: STATE CHANGED
If the RTS command
passed (INS or STB state)
failed
For additional help, contact the next level of support.
The procedure is complete.
(end)
Do
step 8
step 9
Do
step 4
step 9