Nortel North American DMS-100 Instruction Manual page 340

42
43
44
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
link_no
is the number of the link that the C7BERT runs on
MAP response:
Link nn: Automatic query reporting has been terminated
To set the number of reports per hour, type
>REPORT link_no
and press Enter.
where
link_no
is the number of the link (0 to 15) that the C7BERT runs on
number
is the number of reports per hour (1 to 12)
Example input:
>REPORT 1 ON 6
If the response
is Link nn: Report interval set
at:is nn times per hour
is other than listed here
Determine if the report interval is correct.
If the interval
is correct
is wrong
Stop the C7BERT that exists, type
>STOP link_no
and press Enter.
where
link_no
is the number of the link (0 to 15) that the C7BERT runs on
Note: The STOP command overrides any preset stop time without
warning.
If the response
is Link 1: C7BERT stopped
is with a display of test statistics
is other than listed here
Running a C7BERT
ON number
Do
step 43
step 66
Do
step 33
step 41
Do
step 45
step 66
1-325
(continued)