Nortel North American DMS-100 Instruction Manual page 288

9
10
11
12
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Restoring far-end service for a D-channel
ISDN PRI primary and backup D-channels
To manually busy the D-channel, type
>BSY d_channel
and press Enter.
where
d_channel
is the D-channel identifier (D1 or D2)
Example of a MAP response:
D1: STATE CHANGED
or
THIS WILL PUT LTC 2 5 24 D2
Please confirm ("YES", "Y", "NO", or "N"):
To confirm the command, type
>YES
and press the Enter key.
Note: The D-channel state changes to manual busy.
If the BSY command
passed
failed
To return the busy D-channel to service, type
>RTS d_channel
where
d_channel
is the D-channel identifier (D1 or D2)
Example of a MAP response:
D2: STATE CHANGED
If the RTS command
passed (INS or STB state)
failed
For additional help, contact the next level of support.
The procedure is complete.
OUT-OF-SERVICE
Do
step 10
step 11
Do
step 4
step 11
1-273
(end)