Nortel North American DMS-100 Instruction Manual page 549

1-528 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone/integrated)
Clearing ORDB access trouble
Example of TAMI Response
Performing Basic HSDA Diagnostic (Circuit Pack Reset)
Performing Basic HSDA Diagnostic (Query Status)...
Performing Basic HSDA Diagnostic (SBC-HSDA Loopback)...
Performing Extensive HSDA Diagnostic (System Memory, this
is long test)
Performing Extensive HSDA Diagnostic (Timers and
Interrupts)
Performing Extensive HSDA Diagnostic (Data Communication)
HSDA Diagnostic Passed
9
10
At the TPC
11
297-8021-544 Standard 14.02 May 2001
(continued)
Determine if the test passes.
If test
passes
passes and No ORDB displays
fails and HSDA card replaced
fails and error code is 601
fails and error code is 602
fails and error code is 603-607
For additional help, contact the next level of support.
CAUTION
Service interruption
When you replace an HSDA card in the TPC, all four
operator positions cannot process calls.
Replace the HSDA card in slot 13 (integrated) or 8 (standalone). Refer to
Card Replacement Procedures and return to step 5.
Do
step 12
step 10
step 10
step 10
Busy the card. Perform step 8
step 11