Nortel North American DMS-100 Instruction Manual page 119

1-104 Trouble locating and clearing procedures (continued)
Replacing an 8-in. or a 5.25-in. disk drive unit
32
33
At the front of the DDU shelf
34
35
297-8021-544 Standard 14.02 May 2001
Attach the slider mounting plate to the bottom of the replacement DDU. Refer
to the diagram in step 31.
Attach the lower slider assembly to mounting plate. Refer to the diagram in
step 30.
Slide the replacement DDU into the tracks on the frame. Slide the DDU until
the spring clip on the upper slider causes the DDU to stop. Refer to the
diagram in step 20.
Press the spring clip and slide the DDU the rest of the way into the frame.
(continued)
DDU (front) Rubber shock
mount (2)
Spacer (2)
Washers (4)
Screw (2)
Upper slider