Nortel North American DMS-100 Instruction Manual page 509

1-488 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
Clearing position failure - cannot RTS position
Clearing position failure - cannot RTS position
At your current position
1
2
At the TAMI
3
At the affected MP position
4
5
6
297-8021-544 Standard 14.02 May 2001
Perform the common procedure Removing an MP position from service
(standalone) .
Perform the common procedure Placing an MP position in service
(standalone) .
Examine the Position Status/Control menu.
If the VDU displays
InSv
SysB
any other message
Check the HSLI cable. Make sure that the HSL cable is secure.
If the HSLI cable connections
are
secure
not secure
Perform the common procedure Removing an MP position from service
(standalone) .
Secure the HSLI cable connections on the MP position, BIX box, and TPC.
(continued)
Do
step 45
step4
Refer to the correct locating and
clearing trouble procedure for
the indicated trouble.
Do
step 9
step 5