Nortel North American DMS-100 Instruction Manual page 30

1-14 Trouble locating and clearing procedures (continued)
Recovering a stuck two-slot LIU7
LIM lim_no FBus fbus_no Tap tap_no Return to Service
initiated.
12
13
14
15
16
At the LPP
17
297-8021-544 Standard 14.02 May 2001
Example of a MAP response:
If the RTS command
passed
failed
Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
Post the stuck LIU7 by typing
>POST LIU7 liu_no
and pressing the Enter key.
where
liu_no
is the number of the stuck LIU7 (0 to 511)
Manually busy the LIU7 by typing
>BSY
and pressing the Enter key.
Confirm the command by typing
>YES
and pressing the Enter key.
Prepare to unseat and reseat the cards that belong to the stuck LIU7.
WARNING
Static electricity damage
Wear a wrist strap connected to the wrist-strap grounding
point of a frame supervisory panel (FSP) while handling
cards. This protects the cards against damage caused by
static electricity.
Locate the NTEX22 card that belongs to the stuck LIU7.
(continued)
Do
step 27
step 12