Nortel North American DMS-100 Instruction Manual page 648

Troubleshooting a customer-reported failure- no FRIU alarms
At the MAP terminal
1
2
3
4
5
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Troubleshooting a customer-reported failure
Obtain the directory number (DN) from the fault report.
To access the PVDNCI level of the MAP display, type
>PVDNCI
and press Enter.
Example of a MAP response
PVDNCI:
To identify the agent ID for the DN obtained from the fault report, type
>FRSDISP DN NO
and press Enter.
where
dir_no
is the DN obtained from the fault report
Example of a MAP response
PVDNCI:
DN 6132263770 belongs to FRS Agent 1
Note: The agent ID appears at the end of the response. In the example,
the agent ID is 1.
To locate the FRIU and channel for the agent ID, type
>FRSDISP AGENT
and press Enter.
where
agent_no
is the agent ID obtained in step 3
Example of a MAP response
AGENT DN NP
1 6132263770 NATL LS_1536KBS NIL N1
Note: The FRIU number and channel assigned to this agent appear under
the CONNECT TO header in the MAP response. In the example, the FRIU
is 5 and the channel number is 7.
To return to the CI level of the MAP display, type
>QUIT
and press Enter.
No FRIU alarms
dir_no
ID agent_no
SPEED CONDEV AB CUSTOMER CONNECT TO
1-627
(continued)
FRIU 5 7