Nortel North American DMS-100 Instruction Manual page 616

TOPS MPX Token Ring LAN troubleshooting
(Sheet 2 of 4)
Message
Number
DFIPD011I
DFIPD012I
DFIPD013I
DFIPD014I
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Explanation
Message:
Full error reporting disabled
Meaning: Full Error Reporting is disabled. The user pressed
F7 (Full E.R.) when Full E.R. was in effect.
Action: There is no action required.
Variable Data: Does not apply
Message:
Limited error reporting enabled
Meaning: Limited Error Reporting is active. The user pressed
F8 (Limited E.R.) or started Ring diagnostic with the /L
parameter in effect.
Action: There is no action required.
Variable Data: Does not apply
Message:
Limited error reporting disabled
Meaning: Limited Error Reporting is disabled. The user
pressed F8 (Limited E.R.) when Limited Full E.R. was in effect.
Action: There is no action required.
Variable Data: Does not apply
Message:
Error counters reset
Meaning: The error counters for the soft error reporter function
of the Ring Diagnostic are reset. The user pressed F9 (Reset
Counts). When this message displays, a ring status of Soft
Error changes to Normal.
Action: There is no action required.
Variable Data: Does not apply
1-595
(continued)