Nortel North American DMS-100 Instruction Manual page 481

1-460 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
Clearing link trouble
25
26
At the affected MP position
27
28
At the TAMI
29
30
297-8021-544 Standard 14.02 May 2001
(continued)
If test
fails
Perform the common procedure Placing the MP position in service
(standalone) .
Determine if the MP position returns to service.
If the MP position
returns to service and RES ap-
pears
fails return to service
Examine the VDU display.
If MP VDU message
is Please log on
is Link
problems
countered
is other than listed here
Perform the common procedure Removing the MP position from service
(standalone) .
To access the Diagnostics screen from the TAMI menu, type:
>5
and press the Enter key.
TAMI response
Enter TPC Diagnostics command:
Make sure that the MP position is busy. To run the HSLI card test from the
Diagnostics screen, type:
>POSDIAG nnn HSLI
and press the Enter key.
where
nnn
is the position number
Do
Record its number for later use
and go to step 36
Do
step 27
step 30
Do
step 38
step 28
en-
step 37