Nortel North American DMS-100 Instruction Manual page 25

23
24
At the MAP terminal
25
26
27
28
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Recovering a stuck HLIU or HSLR
Verify the type of PM.
If the PM is an
HLIU
HSLR
Repeat steps 21, 22, and 23 for the NTEX76 card that belongs to the stuck
HLIU. If you have already reseated both cards, go to step 25.
Reload the HLIU or HSLR by typing
>LOADPM
and pressing the Enter key.
If the LOADPM command
passed
failed
Return the HLIU or HSLR to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
For further assistance, contact the personnel responsible for the next level of
support.
You have completed this procedure.
Do
step 24
step 25
Do
step 26
step 27
Do
step 28
step 27
1-9
(end)