Tops Mp Operator Complaint (Standalone) Clearing Link Trouble - Nortel North American DMS-100 Instruction Manual

Application
Use this Clearing link trouble procedure to clear Traffic Operator Position
System (TOPS) Multipurpose (MP) link problems.
Definition
Submit this problem when the MP VDU message Link problems
encountered appears and the operator cannot log on to the MP position.
When this message appears, a fault is present on the data link between the
VDU controller and the DMS.
Common procedures
This procedure contains the following references:
•
•
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued) 1-447
TOPS MP Operator complaint (standalone)
Removing MP position from service (standalone)
Placing MP position in service (standalone)
Clearing link trouble