Nortel North American DMS-100 Instruction Manual page 482

31
At the TAMI
32
33
34
At the affected MP position
35
36
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
TAMI response
Downloading MP.
Performing HSLI Loopback Diagnostic
If test
passes
fails
passes with card replaced
fails with card replaced
Replace HSLI card. Refer to Card Replacement Procedures and return to
step 30.
To quit the Diagnostics screen, type:
>QUIT
and press the Enter key.
Perform the common procedure Placing the MP position in service
(standalone) .
Determine if the MP position returns to service.
If the MP position
returns to service and RES ap-
pears
fails return to service
Examine the VDU display.
If MP VDU displays
Please log on
Link problems encoun-
tered
any other message
For further assistance, contact the personnel responsible for the next level of
support.
Clearing link trouble
Do
step 36
step 31
step 32
step 36
Do
step 35
step 36
Do
step 38
step 36
step 37
1-461
(continued)