Nortel North American DMS-100 Instruction Manual page 363

1-348 Trouble locating and clearing procedures (continued)
Running a C7BERT for high-speed links
12
13
14
15
16
297-8021-544 Standard 14.02 May 2001
Wait 1 to 3 min for the HSLR to change from SysB to InSv.
IfAfter 3 min, if the state of the
HSLR is
InSv
SysB
anything else
To busy the HSLR, type
>BSY
and press the Enter key.
If the BSY command
passed
failed
To return the HSLR to service, type
>RTS
and press the Enter key.
If the RTS command
passed
failed
To enter the C7LKSET level of the MAP display, type
>MAPCI;MTC;CCS;CCS7;C7LKSET
and press the Enter key.
Determine the traffic state of the link you want to test.
Note: The traffic state of the link is visible under the Traf Stat header of
the MAP display. The synchronization state is visible under the Sync Stat
header of the MAP display.
If the traffic and synchroniza-
tion states are in the sequence
given
Offl DAct
Bsy DAct
SysB DAct
(continued)
Do
step 15
step 78
step 78
Do
step 15
step 78
Do
step 15
step 78
Do
step 17
step 18
step 22