Nortel North American DMS-100 Instruction Manual page 42

1-26 Trouble locating and clearing procedures (continued)
Removing an MP position from service (standalone)
Example of a TAMI response
7
297-8021-544 Standard 14.02 May 2001
POSITION STATUS/CONTROL
1. Bsy
2. RTS
3. OffL
4. RTS ALL POSITIONS
POSITION NUMBER
0.
1.
2.
3.
MAKE CHOICE:
To busy the relevant MP position, use the following procedure:
a Enter
>1
and press the Enter key.
where
1
is busy
b Enter
>n
and press the Enter key.
where
n
is the MP position number (0, 1, 2, or 3)
c Enter
>Y
and press the Enter key.
where
y
is yes, the position is busied at the MAP
STATUS
InSv
InSv
InSv
InSv
(continued)
CARD PRESENT
YES
YES
YES
YES