Nortel North American DMS-100 Instruction Manual page 415

1-400 Trouble locating and clearing procedures (continued)
Softkey information does not download to the ADSI set
14
15
16
297-8021-544 Standard 14.02 May 2001
Unsolicited MSG limit = 250, Unit 0 = 0, Unit 1 = 0.
Unit 0:
RAM Load: ECL05AY
EEPRom Version: AC01
EEPRom Load: Loadable: MX77NF02, Executable: MX77NF02
CMR LOAD: CMR03A
UP: MX77AA
Unit 1:
RAM Load: ECL05AY
EEPRom Version: AC01
EEPRom Load: Loadable: MX77nf02, Executable: MX77NF02
CMR LOAD: CMR03A
UP: MX77AA
Note: In this example, the CMR load name is CMR03A.
Ensure that the CMR card load name in table PMLOADS matches the load
name in table LTCINV or table RCCINV.
To load the CMR card again, type
>LOADPM UNIT unit_no CC CMR
and press Enter.
where
unit_no
is the number of the PM unit (0 or 1)
If load
passes
fails
Note: CMR is an optional parameter that means to load only the CMR
card.
To return the CMR card to service, type
>RTS UNIT unit_no CMR
and press Enter.
where
unit_no
is the number of the PM (0 or 1)
CMR
is an optional parameter that means to return to service only the CMR
card
The following card list is a standard message for a CMR card failure.
(continued)
Do
step 16
step 18