Nortel North American DMS-100 Instruction Manual page 22

1-6 Trouble locating and clearing procedures (continued)
Recovering a stuck HLIU or HSLR
10
LIM lim_no FBus fbus_no Tap tap_no Return to Service
initiated.
11
12
13
14
297-8021-544 Standard 14.02 May 2001
tap_no
is the number of the F-bus tap (0 to 11)
Perform this step for both F-bus taps associated with the stuck HLIU or HSLR.
Return the F-bus taps associated with the stuck HLIU or HSLR to service by
typing
>RTS FBUS fbus_no
and pressing the Enter key.
where
fbus_no
is the number of the F-bus (0 or 1)
tap_no
is the number of the F-bus tap (0 to 11)
Perform this step for both F-bus taps associated with the stuck HLIU or HSLR.
Example of a MAP response:
If the RTS command
passed
failed
Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
Post the stuck HLIU or HSLR by typing
>POST HLIU liu_no
and pressing the Enter key.
or
>POST HSLR liu_no
and pressing the Enter key.
where
liu_no
is the number of the stuck HLIU or HSLR (0 to 511)
Manually busy the HLIU or HSLR by typing
>BSY
and pressing the Enter key.
Confirm the command by typing
>YES
and pressing the Enter key.
(continued)
tap_no
Do
step 28
step 11