Nortel North American DMS-100 Instruction Manual page 360

Running a C7BERT for high-speed links
At the MAP terminal
1
2
3
Traf Sync
LK Stat Stat
4
Traf Sync
LK Stat Stat Resource Stat Physical Access Stat
0 OffL DAct
1 SysB DAct
Size of Posted Set = 2
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Running a C7BERT for high-speed links
CAUTION
Risk of service interruption
The following procedure takes a CCS7 link out of service.
Before proceeding, consult your next level of support to
ensure network impact is minimized.
Contact the next level of support to obtain the following information:
• how to stop the test (manually or automatically)
• if periodic reports are required and how many times each hour (1 to 12)
If you want to perform a remote loopback, inform personnel at the far-end
office that
• you want to busy and return the link to service
• they must busy and return the link to service at their end
To enter the C7LKSET level of the MAP display, type
>MAPCI;MTC;CCS;CCS7;C7LKSET
and press the Enter key.
Example of a MAP response:
Resource Stat Physical Access Stat
To post the linkset that includes the link that you want to test type
>POST C linkset_name
and press the Enter key.
where
linkset_name
is the name of the linkset (as defined in table C7LKSET)
Example of a MAP response:
DLIU 12
DLIU 13
OffL DS1
InSv DS1
1-345
(continued)
Link
Action
Link
Action