Nortel North American DMS-100 Instruction Manual page 357

1-342 Trouble locating and clearing procedures (continued)
Running a C7BERT
106
107
108
109
110
297-8021-544 Standard 14.02 May 2001
(end)
Tell the person at the far-end office to activate the link. Activate the link from
your end, type
>ACT link_no
and press Enter.
where
link_no
is the number of the link you activated in step 99
If the ACT command
passed
failed
To return the link to service, type
>RTS link_no
and press Enter.
where
link_no
is the number of the link you activated in step 99
If the RTS command
passed
failed
To uninhibit the link, type
>UINH link_no
and press Enter.
where
link_no
is the number of the link you activated in step 99
If the UINH command
passed
failed
For additional help, contact the person responsible for the next level of
support.
The procedure is complete.
Do
step 107
step 109
Do
step 110
step 109
Do
step 110
step 109