Nortel North American DMS-100 Instruction Manual page 402

Setting up the signaling link marginal performance report
9
10
11
12
13
14
15
16
17
18
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
To quit from table OFCVAR, type
>QUIT
and press Enter.
To create OM class C7SLMPR, type
>OMCLASS C7SLMPR
and press Enter.
To add group C7LINK1 to class C7SLMPR, type
>OMACCGRP C7SLMPR
and press Enter.
To delete all registers from group C7LINK1, type
>OMACCFLD C7SLMPR
and press Enter.
To add field C7SUERR, type
>OMACCFLD C7SLMPR
and press Enter.
To add field C7NACKRX, type
>OMACCFLD C7SLMPR
and press Enter.
To add field C7AUTOCO, type
>OMACCFLD C7SLMPR
and press Enter.
To access table OMACC, type
>TABLE OMACC
and press Enter.
To position on tuple C7SLMPR to read the class schedule, type
>POSITION C7SLMPR
and press Enter.
To display the tuple with headers, type
>LIST
and press Enter.
Example of a MAP response:
CLASS ENABLED
––––––––––––––––––––––––––––
C7SLMPR N
SINGLE
ADD GROUP C7LINK1
C7LINK1 DELETE
C7LINK1 ADD FIELD
C7LINK1 ADD FIELD
C7LINK1 ADD FIELD
WHEN
AUTO
1-387
(continued)
ALL
C7SUERR
C7NACKRX
C7AUTOCO