Nortel North American DMS-100 Instruction Manual page 599

1-578 Trouble locating and clearing procedures (continued)
TOPS MPX terminal system diagnostic
TOPS MPX
(continued)
INSTRUCTIONS
Remove the diskette in drive A. The computer hardware tests
are complete. If testing found errors and you continue to
have problems with the computer, refer to What If Testing
Cannot Find the Problem in your Quick Reference manual.
INSTRUCTIONS
You are leaving the testing program. If you want
to start your operating system from diskette, remove
the diskette in drive A and insert the system diskette. If you want
to start your operating system from the fixed disk, remove
the diskette in drive A.
20
297-8021-544 Standard 14.02 May 2001
ENTER = Continue
Reference Diskette test complete.
If
There is no additional test re-
quired.
Page 1 of 1
Page 1 of 1
Do
Remove the reference diskette
from Drive A. Press ENTER
twice. System now boots.