Nortel North American DMS-100 Instruction Manual page 142

61
62
63
64
65
66
67
68
69
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
Replacing a 14-in. disk drive unit
To test the disk drive controller, type
>TST
and press the Enter key.
Note: The test will fail. Ignore the results.
To allocate disk space, type
>DSKALLOC ddu_no
and press the Enter key.
where
ddu_no
is the number of the DDU
To confirm the command, type
>YES
and press the Enter key.
To perform volume allocation tests, perform the procedure Allocating test
volumes on 14-inch DDUs in the Routine Maintenance Procedures.
Complete the procedure and return to this point.
Perform interference and transfer tests. To perform these tests, perform the
procedure Performing DDU interference and file transfer tests in the Routine
Maintenance Procedures. Complete the procedure and return to this point.
Obtain the office records. Determine the names and sizes of the volumes that
you will create on the DDU.
To add a volume to the disk, type
>ADD volname blocks
and press the Enter key.
where
volname
is the name of the additional volume
blocks
is the number of blocks in the volume
Determine if you need to add any more volumes.
If you
need to add more volumes
do not need to add more
volumes
To add the names of the volumes to the directory, type
>DIRADD
and press the Enter key.
Do
step 67
step 69
1-127
(continued)