Nortel North American DMS-100 Instruction Manual page 361

1-346 Trouble locating and clearing procedures (continued)
Running a C7BERT for high-speed links
5
6
PM
7
HLIU 13 InSv
297-8021-544 Standard 14.02 May 2001
Determine the state of the DLIU associated with the link to be tested.
Note: The DLIU state is visible under the Stat header to the right of the
Resource header.
If the DLIU state is
SysB, ManB, or OffL
InSv, or ISTb
anything else
Note: The DLIU consists of two peripherals: the high-speed link router
(HSLR) and the high-speed link interface unit (HLIU).
To enter the PM level of the MAP display, type
>PM
and press the Enter key.
Example of a MAP display:
SysB ManB
1 10
To post the HLIU, type
>POST HLIU dliu_no
and press the Enter key.
where
dliu_no
is the number of the DLIU connected to the link you want to test
Note: The number of the DLIU is under the Resource header of the MAP
display. In the example in step 4, the HLIU connected to link 1 is 13.
Example of a MAP response:
If the HLIU state is
SysB
OffL
ManB
InSv or ISTb
(continued)
Do
step 6
step 16
step 78
OffL CBsy ISTb
12 0
Do
step 8
step 9
step 10
step 11
InSv
6 49