Nortel North American DMS-100 Instruction Manual page 301

1-286 Trouble locating and clearing procedures (continued)
Returning a busy D-channel to service
ISDN PRI single D-channel
5
6
7
8
9
297-8021-544 Standard 14.02 May 2001
(end)
Determine the state of the D-channel.
Note: The MAP display lists the state of the D-channel to the right side of
the DCHL header.
If the state of the D-channel
is INB (installation busy)
is MB (manual busy)
To manually busy the D-channel, type
>BSY
and press the Enter key.
Example of a MAP response:
STATE CHANGED
Note: The D-channel state changes to manual busy (MB).
If the BSY command
passed
failed
To return the D-channel to service, type
>RTS
and press the Enter key.
Example of a MAP response:
STATE CHANGED
If the RTS command
passed (INS state)
failed
For additional help, contact the next level of support.
The procedure is complete.
Do
step 6
step 7
Do
step 7
step 8
Do
step 9
step 8