Nortel North American DMS-100 Instruction Manual page 668

6
7
8
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
VSLE session defaults to audio SLE
CAUTION
Loss of Service
A BSY of the CMR card on the active unit of the PM affects
CLASS services. CLASS services that use the card can not
function.
To busy the CMR card, type
>BSY UNIT unit_no CMR
and press Enter.
where
unit_no
is the number of the PM (0 or 1)
Note: CMR is an optional parameter that means to busy only the CMR
card.
To return the CMR card to service, type
>RTS UNIT unit_no CMR
and press Enter.
where
unit_no
is the number of the PM unit (0 or 1)
Note: CMR is an optional parameter that means to return the CMR card
to service.
If RTS
passes
fails
Examine the generated card list. The performance of one of the following
steps depends on the card list.
The following card list is a standard message of a CMR card failure.
Do
step 23
step 8
1-647
(continued)