Nortel North American DMS-100 Instruction Manual page 670

14
15
16
17
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
VSLE session defaults to audio SLE
If response
is FAILED TO OPEN CORRECTLY
Verify that the CMR card can load. To use the QUERYPM command to
determine the CMR load name, type
>querypm CNTRS
and press Enter.
Example of a MAP response:
Unsolicited MSG limit = 250, Unit 0 = 0, Unit 1 = 0.
Unit 0:
RAM Load: NLG32BU
ROM Load: XPMRKA02
CMR LOAD: CMR33AI5
CMR DEFINERS: 12
MP: 6X45BA/BB
SP: 6X45BA/BB
Unit 1:
RAM Load: NLG32BU
ROM Load: XPMRKA02
CMR LOAD: CMR33AI5
CMR DEFINERS: 12
MP: 6X45BA/BB
SP: 6X45BA/BB
Note: In this example, the CMR load name is CMR33AI5.
Ensure that the CMR card load name in Table PMLOADS matches the load
name in Table LTCINV or Table RCCINV.
To load the CMR card again, type
>LOADPM UNIT unit_no CC CMR
and press Enter.
where
unit_no
is the number of the PM unit (0 or 1)
Note: CMR is an optional parameter that means to load only the CMR
card.
If load
passes
fails
To return the CMR card to service, type
>RTS UNIT unit_no CMR
Do
step 14
Do
step 17
step 22
1-649
(continued)