Table of Contents
Advertisement
38
Chapter 4 Software Troubleshooting
— The
Restrictions
individual lines. Note that lines that are assigned to the same line pool will automatically
assign the same restrictions.
— The
Assigned DNs
must use the DN records panels to assign line pools to telephones.
Check line programming
Use the following procedure to check line programming in your BCM450 system.
To check line programming
1
In the Task Navigation Panel, select the Configuration tab.
2
Select Telephony > Lines.
3
Verify that the programming for all lines is correct; see
explanation of the fields on the panel.
4
Select a line, and then select a tab:
a
Select the Properties tab and verify that the settings are correct; see
page 40 for an explanation of the fields on the tab.
b Select the Preferences tab and verify that the settings are correct; see
page 42 for an explanation of the fields on the tab.
c
Select the Restrictions tab and verify that the settings are correct; see
page 45 for an explanation of the fields on the tab.
d Select the Assigned DNs tab and verify that the settings are correct; see
DNs
5
Repeat step 4 for the remaining lines.
6
Correct any programming problems, or restore the system data; see
on page 46
Trunk/Line data
The top-level Table View panel shows line records for all lines active on the system, and the
common assigned parameters.
Table 7 on page 38
Table 7 Trunk/Line Data main panel (Sheet 1 of 3)
Attribute
Value
Line
This list contains all the
possible line numbers for
the system, including target
lines.
NN40160-700
NN40160-700
tabbed panel allows you to define which restrictions will be active for
tabbed panel provides a quick way to assign lines to telephones. You
on page 46 for an explanation of the fields on the tab.
for more information.
describes the fields found on the Trunk/Line Data main panel.
Description
Configure only those lines that are active on the system.
(Click the Active check box and ensure that the Inactive
check box is empty).
Trunk/Line data
on page 38 for an
Properties
"Restoring system data"
on
Preferences
on
Restrictions
on
Assigned
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
