Bosch Rexroth OptiFeed-FS EcoDrive 03 FLP04VRS Functional Description page 75

ECODRIVE03-FL*-04VRS
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
System Variable V107 "Slip in Measuring Wheel Mode":
The slip between the optional Encoder 2 and Motor Encoder [%] (only in
Measuring Wheel Mode) is issued.
[ ]
Encoder
=
Slip %
Measuring
Fig. 6-3: Calculation of the Slip
System Variable V108 "Target Velocity [IU/s]":
Output of the target velocity, not averaged.
System Variable V113 „Distance from home position to processing
location [IU]":
All movements of the active measurement wheel are counted.
(only for application "Flying Cutoff")
Writing the User Program
Difference after 1 Rev.
Wheel Feed Rate
6-11
of Measuring Wheel
Constant