Table of Contents
Advertisement
4-4
General Instructions for Start-Up
Inputs / Outputs / Marker Flags
Warning
Warnings do not lead to an
automatic shutdown
Designation
The designation of the inputs, outputs and marker flags.
M = Marker Flag
I
= Input
Q = Output
Fig. 4-2: Structure of the Inputs / Outputs / Marker Flags
e.g.
I0.00.6
I
Input
I0
Input, Connector X210
I0.00
Input, Connector X210, Group 0 (Byte)
I0.00.6 Input, Connector X210, Group 0, Bit 6
First user-programmable input
See also: "Inputs, Outputs, Marker Flags" Chapter 10.1.
A number of monitoring functions are performed, depending on the
operating modes and parameter settings. If a state is detected which
allows proper operation for the time being, but eventually generates
an error and leads to a shutdown of the drive, a warning will be
generated if this state continues.
Warning Classes
Warning Class:
without drive reaction
Fig. 4-3: Warning Classes
Warnings can not be externally cleared.
ECODRIVE03-FL*-04VRS
M2.02.0
Bit
Byte
Source
Diagnostic
Drive Reaction:
Message:
E2xx
--
E- 01xx
DOK-ECODR3-FL*-04VRS**-FK01-EN-P
Advertisement
Table of Contents
